TOMARK ✈︎ VIPER SD4 RTC
Scheduled arrival date: 13 November 2026


Aircraft Flight Manual (AFM) ✈︎ VIPER SD4 RTC
Specifications
Powerplant: 4-stroke ROTAX 912 engine 100 hp
Propeller 3-blade: DUC FLASH-R or Neuform CR3065
Strictly forbidden: No aerobatics. No intentional spins.
SPEEDS
Cruising speed: 190 km/h (102 kt)
Stall speed flaps UP: 49 kts.
Stall speed flaps 2 (normal landing): 43 kts.
Best angle of climb speed (Vx): 53 kts
Best rate of climb speed (Vy): 65 kts
Best glide speed: 64 kts
Climb rate: 905 ft/min
DISTANCES
Take-off distance: 195 m (905 ft.)
Landing distance: 210 m (689 ft.)
Range: 1,400 km (756 NM)
Glide ratio range: 8:1
FUEL
Total capacity Fuel tank: 100 litres (26.4 US gal); 50 litres in each fuel tank (wing)
Useable Fuel capacity: 90 litres
The following fuels may be used: AvGas 100LL or MoGas
OIL
Oil: SHELL Aero Shell Sport Plus 4 (recommended)
Total Oil Capacity: 3.5 liters (with oil cooler)
Refill Quantity: 3 liters
Oil Quantity Operating Range: 2.5 - 3 liters (in sump; oil level between min. and max. mark)
WEIGHTS
Max Take Off Weight (MTOW): 600 kg
Max Landing Weight (MLW): 600 kg
Empty Weight: 376 kg (Max: 405 kg)
Fuel tank capacity: 72 kg (2 x 50 liters)
WIND LIMITATIONS
Maximum demonstrated components of wind for Take-off and Landing:
Crosswind: Max 15 kts
Tailwind: Max 5 kts
FLAPS
UP = Retracted
1 = 15 degrees
2 = 30 degrees = Normal landing configuration
3 = 40 degrees = Only for precautionary 'Short-Field Landing' i.e. Non-Normal operations
Viper SD4 RTC, manufactured by TOMARK, are equipped with dual high resolution touch screen EFIS - Electronic Flight Instrument Display - ( DYNON Avionics Skyview HDX 1100 - 10 inch ) and displays the primary flight display, navigation mapping and the engine monitoring system (EMS).

Quick Tips
Menu Page
Info Button & Page
Nearest (NRST)
Direct TO
Introduction: Touchscreen features
Knobs & Buttons
Display Page & Layout
Display Button & Page
Transponder
COM Radio
SV-Comm Panel
Menu Page & Touchscreen Controls
Comm Radio
Engine Management System (EMS)
Engine Lean Assist Features
Screen Layout Management
MENU Button & Page